QL80 COP84 DHD380 M80 SD8 DTH Hammers , High Pressure mining hammer 8.0''
In DTH hammers, the rock drilling bit is a continuation of the shank, which the rock drill piston strikes directly. Since the piston is in direct contact with the drill bit, little energy is lost. This gives DTH hammers a nearly constant penetration rate regardless of hole length.
Basic Information
| Items |
Replacement Parts |
| 1 |
Top sub |
| 2 |
O-ring of top sub |
| 3 |
Breakout Ring |
| 4 |
Check Valve |
| 5 |
Spring |
| 6 |
Compression Buffer |
| 7 |
Air Distributor |
| 8 |
Internal cylinder |
| 9 |
Piston |
| 10 |
External cylinder |
| 11 |
Guide sleeve |
| 12 |
O-ring of stop ring |
| 13 |
Stop ring |
| 14 |
Breakout ring |
| 15 |
Drive chunk |
| 16 |
Drill bit |
COP84/ DHD380 Hammer Specification:
| Drilling Diameter(mm) |
Hammer Length Without Bit(mm) |
External Diameter(mm) |
Weight Without Bit(kg) |
| φ195-φ254 |
1492 |
180mm |
188 |
| Working Pressure(Mpa) |
Air Consumption(m³/min) |
| 1.5-3.0 Mpa |
1.0Mpa: 15 m³/min |
1.8Mpa: 26 m³/min |
2.4Mpa: 34 m³/min |
| Impact rate at 17 bar |
Recommended Rotation Speed |
Connection Rod Thread |
Bit Shank |
| 27HZ |
20-30 r/min. |
API 4 1/2'' Reg |
COP84/DHD380 |
Applications
1. mine and quarry
2. road construction for the drilling and blasting work
3. water well drilling
4. slope protection
KSQ Related Rock Drilling Tools:
(1) Integral Drill Rod–Shank H19 x 108mm and H22 108mm.
(2) Tapered Rock Drill Tools - chisel bit, cross bit, button bit, drill rod of taper 7, 11, 12 degree
(3) Threaded Rock Drill Tools - button bit, retrac button bit, drop center button bit, dome bit, reaming bit,extension rod, MF-Rod, coupling sleeve of thread R25, R28, R32, R38, T38, T45, T51, ST58, ST68.
(4) Shank Adapters (Striking Bars) - equivalent to Atlas Copco, , Furukawa, Gardner Genver, Ingersoll Rand etc.
(5) Down-the-hole (DTH) Bits& Hammers - 3'', 4'', 5'', 6'', 8'' hammer and DTH button bit.
Other products: Tricone bits, PDC bits, self- drilling hollow anchor bar etc.
Your message must be between 20-3,000 characters!
