Tunneling Self Drilling Anchor Bolt Thread 1600kN Ultimate Load Capacity

Self Drilling Anchor System

T76N - 76mm Anchor Bolt

Made of #45 Steel

Descriprion: 

The self-drilling hollow bar anchor system consists of a hollow threaded bar with an attached drill bit that can perform drilling, anchoring and grouting in a single operation. The hollow bar allows air and water to freely pass through the bar during drilling to remove debris and then allow grout to be injected immediately after drilling is completed. Grout fills the hollow bar and completely covers the entire bolt. Couplings can be used to join hollow bars and extend the bolt length while nuts and plates are used to provide the required tension.

Self-drilling hollow bar anchor system is the most common used system for rock mass stabilization, especially in tunneling, underground mining and ground engineering industry. It is mainly used for the supporting engineering in the loose and broken rock stratal with difficult to drilling hole. It provides the optimal solution for soil nailing, lock bolting, micro-piling.

Self-drilling hollow bar anchor system fulfills current and increasing demands of the tunneling, mining industry and ground engineering for safer and faster production. The system provides advantages for all areas of its applications, where boreholes would require the time consuming drilling with casing systems in unconsolidated or cohesive soil.

Applications: 

- Slope stabilization:

Self-Drilling Anchors are used to stabilize unstable rock/soil formations. The unconsolidated or weathered ground conditions favor the SDA technique for a fast and simple method of installation compared to the traditional methods.

- Foundations with micropiles:

SDA micropiles can be defined as drilled piles, composed of injected grout with the anchor rod as steel reinforcement. They can be installed in sites with limited space using light drilling equipment, can be installed into most ground conditions including rock and are suitable for tension and compression loads. The big advantage is the combined drilling and grouting making high piling outputs possible.

- Tunneling:

Self drilling anchors are the most economical solution for the reinforcement of the tunnel circumference and advanced roof support for tunnel excavation in overburdened and soft fractured rock conditions.

Components of the Self-Drilling Anchor:

Hex Nut Termination Plate for new construction or bracket for underpinning HDPE Pipe for unbonded length or additional corrosion protection Soil Cement Grout Body Final Injection Grout Magnacore Self-Drilling Anchor Bar allows injection while serving as drill strong Coupler Centralizer to keep the micropile centered in the hole to allow for optimal grout cover Sacrificial Bit Grout Flushing Holes

Package: Carton or Wooden Box; also we can follow customers' requirements.
Delivery time is around 15-25 days.

MIROC® Production:
Integral Rods
Plug Hole Rods
Tapered Drilling Tools
Extension Drilling Tools
Drifting and Tunneling Tools
Reaming Tools
Shank Rods
Coupling Sleeves
Shank Adapters (Striking Bars)
Down-the-hole (DTH) Bits
Down-the-hole (DTH) Hammers

Elisa (Елизавета)